- ページ 4

リベット工具 Gage Bilt GB585のPDF オリジナル取扱説明書をオンラインで閲覧またはダウンロードできます。Gage Bilt GB585 20 ページ。 Installation tool
Gage Bilt GB585 にも：インストール (11 ページ)

WARNING:

Any other use is forbidden.

The GB585 and the GB585A are hydraulic installation tools designed specifically for the efficient installation of 5/8" and

3/4" HP8 or standard lockbolts. It weighs just under 20 lbs. (9.07 kg.). It has a 1.600" (40.6 mm) rivet stroke and a rated pull load

of 40,000 lbs. (177.9 kN).

The GB585 installation tool operates on hydraulic pressure developed by the GB940 Powerunit set at 5,400-5,700 psi

(372.3 - 393.0 bar) maximum PULL pressure and 2,200-2,400 psi. (151.7 - 165.5 bar) maximum RETURN pressure. The

tool comes equipped with 2 feet (.61 m) of hydraulic hoses and couplings, electric switch and cord.

The GB585A installation tool operates on hydraulic pressure developed by the GB910 & GB912 Powerunits set at 5,400-5,700 psi

(372.3 - 393.0 bar) maximum PULL pressure and 2,200-2,400 psi. (151.7 - 165.5 bar) maximum RETURN pressure. The tool

comes equipped with 2 feet (.61 m) of hydraulic hoses, swivels and couplings, air actuator and tube.

ALL GAGE BILT HYDRAULIC INSTALLATION TOOLS ARE COMPATABLE WITH HUCK® POWERUNITS. NOSE ASSEMBLIES ARE

NOT FURNISHED WITH THESE TOOLS AND MUST BE ORDERED SEPARATELY. (See nose assembly selection chart on pg. 15).

WARNING:

Do not operate in an explosive atmosphere.

The GB585 AND GB585A can be operated between 0ºF — 118ºF (-17.8ºC / 47.8ºC)

GB585 / GB585A INTALLATION TOOL

DESCRIPTION

ENVIRONMENTAL USE

SPECIFICATIONS

Weight

Hyd. Pressure Req'd.

Hyd. Power Source

Hydraulic Oil

Setting Stroke

Rated Pull Load

- 20 lbs. (9.07 kg)

- 5400 –5700 psi (372-3 - 393.0 bar) PULL

2200 –2400 psi (151.7- 165.5 bar) RETURN

- GB940, GB910 & GB912 Powerunits or equivalent.

- Fire resistant hydraulic oil conforming

with OSHA regulation 1926.302.

- 1.600" (40.6 mm)

- 40,000 lbs. (177.9 kN)

REV. 12/17