- ページ 11

ヒーター Dyna-Glo RMC-55R7BのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Dyna-Glo RMC-55R7B 20 ページ。 Portable kerosene heater
Dyna-Glo RMC-55R7B にも：オーナーズマニュアル (20 ページ)

ページを印刷する

WICK REPLACEMENT

Wick replacement should be performed on a completely cool heater after the cartridge tank has been removed and

the remainder of the kerosene in the heater has been burned off.

Use only genuine replacement wick.

Replacement wick number : Glowick 200-B, Kero-World 20401-U, Dura Heat DH-200, Pick-A-Wick-PW27.

Open the tank cover and

remove the cartridge tank.

Remove the batteries to

prevent possible burns.

Open the front grille and

remove the chimney.

Remove the wick adjusting

knob by pulling straight out.

Remove the screw on the wind

cover.

Unscrew 4 wing nuts.

Unscrew 5 screws, two from the

back and one from the right side

and two from the left side of the

cabinet.

Step 1

Remove the wind cover.

Step 4

Remove the wick adjuster

assembly.

Step 7

Step 2

Step 5

Remove the wick from the holder

by folding it toward the center

loosening it from the sharp

metal teeth on the inner surface

of the holder, and slide it out.

Step 8

Remove the cabinet.

By pulling it straight up.

Remove the automatic ignition

Assembly by unscrewing 2 screws.

Step 3

Step 6

Step 9