- ページ 8

ネットワーク・ルーター GREAT ARBOR GAC-152のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。GREAT ARBOR GAC-152 20 ページ。 Gac-150 series wi-fi dial up router

G E T T I N G

S T A R T E D

If you want to use the router in wired mode, connect the PC's LAN port with the supplied LAN cable to any one of the 4

LAN ports on the router. Make sure that the PC is configured to get it's IP address automatically. Note that PCs are

usually configured for automatic IP address assignment.

Configure the Router

You can skip the configuration process described below if you want to continue using

the pre-configured free ISP and associated long distance number. This may be a good

option if you have an unlimited long distance plan.

Connect via WiFi to the

and enter the address

configuration page on the router and not a web site on the Internet. The login screen will

appear. Login to the router with user name

Click the

Network

interface shows the status of the dial up connection.

FIGURE 2

Interface Status Page

Next click the DIALUP tab under

appear as shown in Figure 3 below. Only a few entries on this page need to be changed.

Set the Username and Password to that of your Dial Up ISP Account and specify the

ISP access phone number. Press Save & Apply. The router will store the new entries and

bring the interfaces up. Wait a minute, remove and re-insert power to the router and

once the SYS LED is solid, press the

OpenWrt

ID as described earlier. Open up your web browser

http://192.168.1.1

tab to open up the Interfaces page. In this page the

Interfaces

DIAL

in the address bar. This is the internal web

root

and password

and the Dial Up configuration page will

button to dial your ISP.

admin

DIALUP