- ページ 7

ディスク・デュプリケーター Hi-Copy DMX-8631 UのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Hi-Copy DMX-8631 U 19 ページ。 Fully stand-alone cd duplicator device

6. Operation for quick duplication

5-1. Power on, a short beep will sound, and green LED lights up.

5-2. Open doors of both CD-ROM and CD-RW drives.

5-3. Put source CD into CD-ROM drive.

5-4. Put blank CD into CD-RW drive.

5-5. Close doors of both drives.

5-6. In general, if source CD is in good condition, just press Run

key to perform maximun speed duplication. Or,

press Speed key to perform secure duplication. It will start

speed test from the maximum speed, 4x speed, then to 1x speed.

If a speed meets the requirement, it will use that speed to per-

form the duplication.

7. Operation Step by Step

Warming up:

Operation

Green, orange and red LEDs

flash about 25 seconds.

One short beep sounds, green

LED lights up.

Copy Mode :

Operation

Open doors of CD-ROM and

CD-R/W.

Put source CD into CD-ROM,

then put blank CD into CD-RW,

close the doors of CD-ROM

and CD-RW. Press

default copy or press

to have secure copy.

During copy, LED on panels

of CD-ROM and CD-RW flash.

If OK, one short beep sounds

and ejects target CD.

DMX-8631E/F/U Installation Guide

Run

key to have

Speed

key

Error Message

One long beep sounds,

red LED lights.

Error Message

One long beep sounds,

red LED lights.

Yellow LED lights.

Yellow LED off.