ページを印刷する
Pairing
(Step-
by- Step)
6
Pairing
1.
Keep the BTS and your device within 10 feet while pairing.
2.
Put the BTS into Pair Mode by pushing the multifunction
button for 8 seconds until the LED light begins to flash
both blue and red.
3.
Begin searching for Bluetooth devices on your
smartphone or PC.
4.
The BTS will appear in the list of available
devices as "66 BT Sport"
5.
Tap to connect and pair.
6.
You are now connected and the LED will flash blue only to
indicate successful communication every 4 seconds.
•
If the pairing is not successful, switch off headphones by pushing
the multifunction button for 3 seconds, then re-pair according to the
steps outlined above.
•
After pairing is successful, paired devices will remember each other
unless pairing information is deleted. There is no need to pair again.
•
The headphones will connect with the most recent paired device.
If you want to pair with other Bluetooth devices, switch off the
Bluetooth function of the current device, then pair and connect it with
the new Bluetooth device according to the steps outlined above.