- ページ 3
コーヒーメーカー Hi-Fly Espresso HFE98-28 SERIESのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Hi-Fly Espresso HFE98-28 SERIES 6 ページ。 Fast and easy
ページを印刷する3
Trouble Shooting
Trouble
Cause
•
Power not
ON/OFF
LED
reaching the unit
does not
•
Electrical
illuminate
connector not
properly fitted
into the socket
•
NO WATER
LED
Water is not
is illuminated
reaching the unit
•
Water connector
not properly
fitted in socket
•
Unit not warmed
READY
LED does
up
not illuminate
•
Handle
COFFEE
brewing
microswitch is
cycle does not
not activated
function
•
Coffee pod
compressor
obstructed
•
No water supply
STEAM
output
does not function
•
No water supply
HOT WATER
output does not
function
•
Holder or pod in
WATER
leaking
wrong position
from the coffee
pod holder
•
Drain not
WATER
leaking
connected
from the unit
appropriately
IMPORTANT when the installer put the unit into the rail system he has to make
sure that the unit is inserted all the way and the latch mechanism is engaged.
The installer should not be able to pull out the unit without pulling the latch.
Corrective
Check
Action
•
•
Check power
Repair and adjust
supply in the
as needed
•
galley
Adjust so that the
•
Check pins,
connector properly
connector and
fits
socket
•
Check if the
Espresso
Machine is well
engaged.
•
•
Check water
Connect and or
supply and
adjust water supply
•
connection
Adjust so connector
•
Check connector
fits properly
and socket
•
•
Check LED
Wait 2 minutes for
unit to warm up
•
•
Check handle
Lower handle to
position
appropriate position
•
Remove any
•
Check coffee
obstruction from
pod holder
coffee pod holder
•
•
Check water
See NO WATER
supply and
LED corrective
connector
action above
•
•
Check water
See NO WATER
supply and
LED corrective
connector
action above
•
•
Visually check
Reposition or
coffee pod
replace coffee pod
holder
•
•
Check drain
Adjust so drain is
connector
connected properly
Cleaning
The unit must be kept thoroughly cleaned and sanitized at all
times to avoid bacteria and other harmful substance buildup
and thereby maintaining public health standards.
A thorough cleaning is needed before and after any
maintenance or repair work is performed.
Disconnect the appliance prior to any cleaning operation and
leave it to cool.
If necessary, clean the appliance casing by using a damp
sponge.
CAUTION:
DO NOT USE ABRASIVE CLOTH,
CHLORINE
CLEANING
SPIRITS AND SOLVENTS.
CAUTION:
DO
POLISH/CLEANER
INTERNAL
ESPRESSO MAKER.
A. Bring the handle down into the locked position.
B. Press the "ON/OFF" button. The "ON/OFF" indicator will
illuminate. Wait for the temperature indicator light
"READY" to illuminate, when it does the machine is ready
to operate.
C. Press the "SMALL CUP" button. After a few seconds, the
water flows into the filter cup.
D. When the water has reached its preset amount it stops
automatically.
E. Repeat the operation for the other "SMALL CUP" button.
F. Press the "STEAM SYMBOL" button to start the steam
function. Let the steam flow through the outlet until it
automatically stops.
G. Turn off the machine by pressing the "ON/OFF" button.
4
BLEACH
BASED
AGENTS
OR
OTHER
NOT
USE
METAL
ON
ANY
PARTS
OF
THE