- ページ 3

カメラアクセサリー Active Silicon AS-CIB-IP-002-AのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Active Silicon AS-CIB-IP-002-A 13 ページ。 Harrier ip camera interface board
Active Silicon AS-CIB-IP-002-A にも：クイック・スタート・マニュアル (7 ページ)

ページを印刷する

Setting up the Boards

If you have purchased a pre-assembled camera you can skip this step.

1. Connect the Harrier IP Camera Interface Board (SoC board) (J2) to the Ethernet Connection Board

(J1) using a 24-way 0.5mm pitch double ended (same side contacts) FFC cable. Ensure that the

cable is connected the right way round. For the SoC board (J2) the metal contacts should face

towards the microSD socket (see figure 2). For the connection board (J1), the metal contacts

should face the PCB.

2. Connect the SoC board (J8) to the camera LVDS output using a KEL 30-way microcoax cable.

3. To avoid damage the boards must be securely mounted so that the cables are not strained.

Figure 7. Harrier Ethernet Connection Board

March 2023

HARRIER IP CAMERA INTERFACE BOARD

Figure 8. Harrier IP Camera Interface Board

(SoC board)

QUICK START GUIDE

Version 1.04 – March 2023

Page 3 of 12