- ページ 2
ラック&スタンド Great Lakes 4P-45U32M6のPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Great Lakes 4P-45U32M6 12 ページ。 4 post equipment racks
PREFACE
This manual is provided to prevent service personnel from committing
an act that results in the risk of fire, electric shock, or injury to persons.
Only trained service personnel should receive, unpack, and assemble
the racks. In addition, only trained service personnel should install
equipment in enclosures.
SAFETY SYMBOLS USED IN THIS MANUAL
This manual provides general safety guidelines to be observed during
installation, operation, and maintenance of the racks.
WARNING: Failure to follow directions in the warning could
result in injury to persons or loss of life.
INSTALLATION
RECEIVING, UNPACKING, AND REMOVING THE RACK
Inspect and report damage before receiving. Unpack the rack
by carefully removing the corrugated cartons and corners. Avoid
damaging the rack when removing packaging.
SERVICE
The 4 Post Racks should be repaired by personnel trained by
Great Lakes, or returned to Great Lakes for repair or replacement.
Contact Great Lakes Technical Support at 814.734.7303 or at
werackyourworld.com
WARNING: Improper handling and use of the racks could result in
equipment damage, serious injury, or possible death.
SAFETY CONSIDERATIONS
Only trained service personnel should be used to remove the
enclosure from the pallet. Also, be sure you have a sufficient number of
service personnel. Do not attempt to move enclosures by yourself.
LOADING EQUIPMENT
WARNING: Only install equipment after the 4 Post Rack has been
properly secured. Do not move the rack assembly while loaded.
To maintain a uniform distribution of the mechanical load in the
rack, load the heaviest equipment first, at the bottom of the
rack and load the lighter units at the top.
2