- ページ 12

録音機器 Active Silicon HARRIERのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Active Silicon HARRIER 15 ページ。 Usb/hdmi camera interface board

Using the Tamron Camera Control Application

Go to the Active Silicon website

Application for your model of Tamron camera. Unzip the executable and move it to a suitable folder

on your PC. Tamron Camera Control Applications are only supported on Windows

Please check that the Harrier USB/HDMI Camera Interface Board DIP switches are set for the serial

interface standard that you intend to use and check that you have connected the 10-way cable to the

correct connector on the Harrier Evaluation Board. For more information please see the sections

Setting The Camera Control Interface (DIP switches)

Run the Tamron Camera Control Application executable.

Figure 18. The Tamron MP1110M-VC Camera Control Application

When the Harrier Evaluation Board is plugged in using the mini USB cable, the Windows operating

system will see three virtual COM ports; these ports are automatically assigned (incrementing)

numbers by Windows. To successfully use the Tamron application, it is necessary to identify the

COM port numbers which Windows has assigned to the board and use the correct one.

Open Device Manager and look at the COM & LPT ports. You can identify the three port numbers by

comparing reported port numbers with the board connected, and the board disconnected.

•

The lowest port number added is the RS-232 interface.

•

The second added port number is the RS-485 interface.

•

The highest port number added is the TTL interface.

In the Tamron Application, use the COM: drop-down box at the top left of the application window to

select the COM port that supports the serial interface standard you want to use.

Then click on the Connect button.

Click on the Inq button on the bottom right hand side of the window. You should see the application

send a VISCA command enquiry and the camera sending a response in the TxData and RxData

dialog boxes. This application is not fully compatible with other makes of camera.

March 2021

HARRIER USB/HDMI CAMERA INTERFACE BOARD

Software products page

and

QUICK START GUIDE

and download the Tamron Camera Control

Setting Up The

System.

Version 1.7 – March 2021

Page 12 of 14