ページを印刷するOther Functional Instructions
Dashboard
Introduction of Keys
Open the battery switch, and the dashboard can be seen. Short press the option key, the interface
switching among the ODO, VOL, E (error), A (warning) and DIS.
Mode setting
Long press the key 1 and key 2 (about 3 seconds) simultaneously to set the mode
P01: backlight brightness, 1 darkest, 3 lightest;
P02: Number of speed measuring magnets: Range: 1-255; the number of magnet of R8 is set
to be 6;
P03: wheel diameter: unit inch; precision: 0.1; range: 5.0-50.0; the wheel diameter of R8 is set
to be 26.
P06: Power switching mode
0000: electricity mode is closed. (moped-mode)
0001: electricity mode is opened. (The moped mode has no such function. )
Parameter modification
In a certain parameter state, short press key 1 and key 2 to switch parameters. After modification,
short press the option key to switch to the next parameter, and save the previous parameter;
when parameter modification is completed, long press key 1 and key 2 to exit the settings
interface. Or wait 10 seconds to automatically exit and save the parameters.
Gear adjustment
Long press the Key 2 to switch the ride modes between
electric mode and power-assisted mode in the dashboard.
In the dashboard interface, short press key 1 and key 2
to adjust gears from 1-9 (moped-mode gear).
The In the dashboard interface, short press key 1 and
key 2 to adjust gears from 1-9, A, B, C, D, E, F and H, a
total of 16 gears (electric-mode gear).(The moped mode
has no such function. )
Note: H refers to high speed, choose it cautiously!
Electric mode
is on
Voltage level
Gear adjustment
Multi-function
display
(Moped-mode gear)
Mp/h
km/h
DISODO
- 10 -
DISODO
(Electric-mode gear)
Gear display
Gear display
Option key
DISODO
Speed
Key 1
Key 2