- ページ 8

産業機器 Hi-Force HVL50のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Hi-Force HVL50 13 ページ。 Single-acting, very low height pancake cylinders

5.1 Pump Requirements

Ensure that the hydraulic pump to be used is suitable for the cylinder/s to which it will connect. For a

single-acting cylinder (one pressure coupling connection), a single-acting hydraulic pump fitted with either

a 2-way or 3-way valve and a single, correctly rated hose, must be used.

5.2 Hydraulic Connections

Connect the hydraulic hose/s between the cylinder/s and the pump, ensuring that the coupler/s are

fully hand-tightened ONLY. To do so: [1] Press the male coupler into the female coupler (1), [2] then turn

the threaded-collar clockwise (by hand) until the threads are fully engaged.

NEVER use wrenches in an attempt to connect the coupling/s. Incorrectly connected

coupling/s are one of the most common causes of faulty operation.

IMPORTANT:

Make sure that all coupler threads are fully engaged. (See figure 5.2, panel 3)

Operating Instruction Manual:

5.0 Installation / Setup

Figure 5.1: Hydraulic Connection

OM-HVL-01

Serial Numbers:

From: AF0324