- ページ 7

ラック＆スタンド Great Lakes VRX-45U-2132-M6-HLのPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Great Lakes VRX-45U-2132-M6-HL 12 ページ。 Highlander variable depth racks

STEP 1 CONTINUED To assemble a cross member and extension bar, determine the desired rack

depth. Insert the small square tab of the rear member cross piece into the correct square hole

on the extension bar. Push down on the cross member so that the tab is inserted firmly into the

extension bar hole. Install 1/4-20 bolt and nut on any side hole as shown in DIAGRAM D.

Once the cross members and extension bars have been assembled, the variable depth side rails can

be mounted to the uprights (see DIAGRAM E & F).

Front

Extension

Bar

2. Assemble top width brackets to vertical uprights. DO NOT TIGHTEN!

3/8" Ext. Tooth Washer

3/8-16 x 1" lg Hex

Head Bolt

DIAGRAM D

1/4-20 Nut

DIAGRAM E

Rear Cross

Member

1/4-20 Bolt

3/8" Ext. Tooth Washer

Note orientation of left and

right depth side rails as

well as which direction the

assembly should be facing

(front or rear).

3/8-16 x 1" lg Hex

Head Bolt