- ページ 19

クックトップ Gaggenau VC 422のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Gaggenau VC 422 20 ページ。 Glass ceramic electric cooktop

Installing the control panel

Note:

only install control panel with appliance of the

corresponding type.

Before connecting the appliance, make sure

the electricity is switched off at fuse point!

• Before installation, remove all styrofoam

packaging from the control knobs and peel off

the protective film behind the luminous discs.

• Open the lid of the connecting terminal on the

control panel. Secure the mains connecting lead

as shown in the connection diagram. Secure the

connecting lead with the pull relief. The mains

connecting cable must at least correspond to the

type H 05 VV-F (3 x 1.5 mm

connecting terminal.

• Hold the support plate from the rear against the

cabinet front, insert control knobs into the holes,

secure from the rear with the nuts. Take care to

install control knobs in the correct order: left for

front cooking zone, right for rear cooking zone.

• Secure the control panel with the included nuts

onto the support plate.

). Close the lid of the