- ページ 5

スイッチ Daxten SCOUTMICRO PS-2のPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Daxten SCOUTMICRO PS-2 7 ページ。

Keyboard Hot Key commands

To send Hot Key commands to the SCOUTmicro kvm switch, press and release Ctrl

2 seconds. Press a command key for the desired effect. The following commands are supported:

First Key

Second Key

Ctrl

In Auto-Scan mode, the image shown on the monitor will automatically switch to the next computer.

The delay is user definable (see Table above). After the last computer has been shown, the first

computer will be shown again.

Note: In this mode there is no mouse or keyboard control.

Press any key to exit the Auto-Scan mode. The SCOUTmicro switch will stop at the last PC shown.

The Hot Key sequence can be changed if required.

To change from the factory default of Ctrl

[OLD HOT KEY] [NEW HOT KEY]

Ctrl

for example:

New Hot Key: Scroll Lock Scroll Lock

The following combinations are available for Hot Keys:

Ctrl

Ctrl (default)

Command Key

1 or 2

↑

↓

S 0

S 1

S 2

S 3

Ctrl

Scroll Lock Scroll Lock

Alt Alt

Scroll Lock Scroll Lock

Command Result

Switches to the desired PC

Switch to previous PC

Switch to next PC

Auto-Scan mode ON

Auto-Scan mode OFF

Scan 8 Seconds (default)

Scan 15 Seconds

Scan 30 Seconds

Scan 60 Seconds

Ctrl , please use the following sequence:

Shift Shift

Ctrl within