- ページ 4

ツール Great Lakes GLF 9/16 UTOのPDF 操作説明をオンラインで閲覧またはダウンロードできます。Great Lakes GLF 9/16 UTO 4 ページ。

Wire Diameter

Closure Size

Ring Box Quantity

Ring Stick Quantity

Material

1. Keeping clean of the tools

Do not set tools at the place where will get damage easily. Please keep from dust and humidification. Putting

the tool in proper temperature is very important when the tool does not be used for a long time.

2. Cleaning the obstacle inside of tool

After using tools, please clean any obstacle blocking in JAWS (#40, #50). Keeping the tools clean is better.

3. Putting down tools lightly

After work, please put tools down lightly to avoid damaging the body and the magazine of tool.

ANN-CHAIN ENTERPRISE CO., LTD.

Great Lakes Fastening warrants that the D-Ring Hand Pliers is free from defects in material and

material and workmanship under normal use, within half year from the date of purchase, in the country of

workmanship under normal use, within half year from the date of purchase, in the country of purchase.

purchase. The warranty is extended to the original purchaser only. All parts except the consumable parts are

The warranty is extended to the original purchaser only. All parts except the consumable parts are

warranted for half year from date of purchase and will be replaced if the sole judgment of Great Lakes

warranted for half year from date of purchase and will be replaced if the sole judgment of ANN-CHAIN

Fastening they should be deemed defective over and above that considered to be normal wear.

ENTERPRISE CO., LTD. they should be deemed defective over and above that considered to be normal wear.

◆ Always read tool manual before operating.

◆ Do not point the tool at anyone.

◆ Keep hands and clothing away from the front of Jaws of the tool and away from all moving parts. Injury

may result. Failure to follow these precautions may result in serious injury.

◆ Keep others at a safe distance from the tool while the tool is in operation as actuation occurs, possibly

causing injury.

◆ Always wear safety glasses while operating or while in the vicinity of a tool in operation.

◆ Always operate tool in an unobstructed work area.

SPECIFICATIONS FOR D-RING

1.6mm

5.7×6.2mm

2500 pcs

50 pcs

Galvanized / Stainless Steel

Aluminum / Zinc-Aluminum

PERIODIC MAINTENANCE

LIMITED WARRANTY

WARNING

warrants that the D-Ring Hand Pliers is free from Defects in