- ページ 11

電子タバコ hi-Fun hi-CigaretteのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。hi-Fun hi-Cigarette 17 ページ。

INSTALLATION

Assemble hi-Cigarette by screwing the cartomizer to the

battery with no over-tighten.

In order to disassemble the two elements, unscrew them

with the opposite operation.

USE

1) Vaporization

Press the button (1) to switch on the cartomizer. The

multifunction red / blue / purple LED (2) that indicates

selected voltage turns on while the state of charge of the

battery is shown on the LED bar (3).

Each LED on the bar indicates 20% of power: all LEDs

turned on together indicate full hi-Cigarette autonomy.

Press and hold the button while inhaling.

When the button is released, vaporization stops and

hi-Cigarette switches to stand-by mode. All LEDs (2) on

the power bar (3) turn off.

The correct position for using hi-Cigarette is keeping it

sloped downwards between 30° and horizontal position.

WARNING: Use on a wrong position can let the liquid

come out of hi-Cigarette and cause irritation to the mouth.

Holding the button (1) for more than 15 seconds, the LED

indicator will blink for 3 times and hi-Cigarette will turn off

automatically for preserving the cartomizer.

2) Voltage

hi-Cigarette allows you to set the voltage and select three