- ページ 2

エンクロージャー Great Lakes Case & Cabinet GL840EZ-3042のPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Great Lakes Case & Cabinet GL840EZ-3042 16 ページ。 Ez seismic enclosure

PRefaCe

This manual is provided to prevent service personnel from committing

an act that results in the risk of fire, electric shock, or injury to persons.

Only trained service personnel should receive, unpack, and assemble

the EZ Enclosure. In addition, only trained service personnel should

install equipment in enclosures.

Safety SymbolS USed In thIS manUal

This manual provides general safety guidelines to be observed during

installation, operation, and maintenance of the EZ Enclosure.

WARNING: Failure to follow directions in the warning could result in

injury to persons or loss of life.

CAUTION: Failure to follow directions in the caution could result in

damage to equipment or storage data.

Safety ConSIderatIonS

WARNING: Improper handling and use of the EZ Enclosure could result

in equipment damage, serious injury, or possible death.

Only trained service personnel should be used to remove the enclosure

from the pallet. Also, be sure you have a sufficient number of service

personnel. Do not attempt to move enclosures by yourself.

Only UL® Listed ITE (Information Technology Equipment) units should

be installed inside the EZ Enclosure.

Be sure to read and follow all individual manufacturer equipment

manuals for safety and installation instructions.

Proper spacing is required when installing electrical equipment to avoid

electrical shock. Maintain minimum spacing between the accessories

and components and the computer enclosure assembly for safe

operation of the equipment when installed in accordance with the

National Electric Code ANSI/NFPA 70-1999.

The ambient temperature operating range for the EZ Enclosure and

accessories is +50 to +95° F (+10 to +35° C).

The non-operating temperature is -4 to +140° F (-20 to +60° C).