- ページ 9

ストレージ Active Storage MVaultのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Active Storage MVault 12 ページ。

mVault I

Quick Start Guide

mVault supported options

UPS control

UPS control for mVault is managed by ActiveRAID or mRAID UPS connection.

System Management

System Management is performed remotely using Active Viewer and Active Admin, no direct connection other

than SAS I/O is required.

System Problems

If you should ever experience a problem with your mVault system, you can quickly assess the problem using

the Active Viewer software on a remote computer. In addition, if you are near the system, you can refer to the

system status indicators on the enclosure in order to determine the component at fault.

If you are unsure about replacement or require a service part, you can contact your reseller, or call Active

Storage support directly at 1-818-709-1133. Alternately you can contact support at

support@active-

storage.com

or visit

www.active-storage.com/support

for the diagnostic information.

CAUTIONS

The pre-installed hard disk modules were designed specifically for use in the mVault. They will not function

correctly in other systems. Using these hard disk modules in another system may result in data loss.

The mVault system is designed for continuous use as a high-density archive storage. No system maintenance

other than periodic vacuuming of the front panel is required.

mVault I Quick Start Guide 2012 - v1.0