- ページ 11

無線モジュール Hi-Link HLK-RM04のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Hi-Link HLK-RM04 18 ページ。 Serial to ehthernet
Hi-Link HLK-RM04 にも：ユーザーマニュアル (5 ページ), アプリケーション・マニュアル (12 ページ)

ページを印刷する

Tes

Trst

Firmware upgrade

1. Restore the factory value.

2. Pc can connect with module through Ethernet, ip: 192.168.16.123/255.255.255.0. Browser

visits 192.168.16.254. Username / password: admin / admin.

3. Open the following page. Select the appropriate firmware, click apply upgrades. Wait a

3 minutes. Can not cut out the upgrade process, otherwise it may cause damage to the module.

Typical application network settings

This secti

on will give some simple examples to use the different functions of a typical

configuration.

9.1 Serial to Ethernet

1. Restore factory value setting.

2. Pc can connect with module through Ethernet, ip: 192.168.1

visits 192.168.16.254. Username / password: admin / admin.

3. Open the following page, click on the R

as below. Clicks APPLY to take effect.

100ms

6.123/255.255.255.0. Browser

ADIO OFF button to turn off wifi function, shown

bout