- ページ 2
ベビーアクセサリー 7 A.M. Enfant BLANKET 212 EVOLUTIONのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。7 A.M. Enfant BLANKET 212 EVOLUTION 2 ページ。
ページを印刷するFRONT
HOW TO USE ON STROLLER
HOW TO USE ON CARSEAT
HOW TO USE IN BASSINET
After the winter season, you may machine was the B212e and store
it in its packaging until the winter days are upon us again. The care
label is located on the internal side of the product.
WARNING:
Never leave child unattended in this product. Make sure that the child's face is not covered by any part of this product. Child should never be placed face-down in this product. Do not use this
product as sleepwear or bedding. The child should not put buttons, plastic ends, snaps or other parts of this product into her/his mouth. Always use care when using zippers to avoid injury to the child.
User Manual
BLANKET 212 EVOLUTION
Adjust the B212e to your child's size
1
3
by removing the zippered extensions
(see "How to adjust length").
2
Place the B212e onto the stroller.
4
1
Adjust the B212e to your child's size
2
by removing the zippered extensions
(see "How to adjust length").
3
1
Remove the zippered extensions (see
"How to adjust length).
Open the B212e and place into the
2
1
bassinet.
2
Lay your baby on the B212e. Make
3
sure your baby's face is uncovered at
all times.
Zip the B212e up using the most
4
1
narrow zipper position to cover your
baby.
2
Do not use the B212e as bedding in a
3
crib or at home bassinet.
Use the hook & loop straps located
5
Pull the stroller's 5-point harness
on the sides of the B212e to attach to
through the opening slits located on
the stroller's back or sidebars to
the back of theB212e by choosing the
secure it.
height of the slits corresponding to
your child's size.
Unzip to open the B212e.
Detach the removable back panel to
Pull the carseat 5-point harness
4
reveal the large back opening and to
through the large back opening.
eliminate material between your
baby's back and the car seat. Store it
5
Seat your child on the B212e in the
for stroller use.
carseat and fasten the safety harness
as per manufacturer's instructions.
Place the B212e onto the carseat and
unzip to open the B212e.
HOW TO ADJUST LENGTH
The two extensions are already attached to the B212e when purchased.
Size 0-6M: No extension
Size 6-18M: Base + 1 extension
Unzip extensions.
Zip up extension #1 to base.
1
Snap bottom end of base
2
Close bottom of extension #1.
closed.
Size 18-4T: Base + 2 extensions - Full size
Zip up extension #2 to base.
Zip up extension #1 to extension #2.
Close bottom of extension #1.
Take note: Set extensions aside for when your child has outgrown
the first and second size. We do not sell replacements.
BACK
Seat your child on the B212e in the
6
stroller and fasten the safety harness
as per manufacturer's instructions.
Zip the front of the B212e up.
7
Put the hood on or o your child's
8
head and adapt closure as desired by
pulling the safety buttoned,
contoured, elasticized hood.
6
Whether the carseat is used in the
car or on a stroller, you can leave the
B212e open or closed as desired.
HOW TO ADJUST WIDTH
According to your child's age, weight and desired comfort:
Base: Zip up to one of the double zippers to reduce
1
or expand the blanket in width.
Close bottom of extension #1.
2