- ページ 7

室内装飾品 Great Little Trading Blake L5357のPDF 組立説明書をオンラインで閲覧またはダウンロードできます。Great Little Trading Blake L5357 11 ページ。 Storage bench

STEP 7:

Take the footed base panel (F) and

insert 2x cam dowels (#1) into the

outer holes in the centre of the panel

as shown.

Take central foot (G) and insert 2x wooden dowels into the outer holes on the

foot. Use these dowels to position the foot (G) on the underside of the base panel

(F). When in place, take 1x bolt (#5) and insert into the central hole on the top of

Hardware for Step 7:

2x #1 Cam Dowels

base panel (F) into the foot (G) and tighten fully.

Hardware for Step 8:

2x #4 Wooden Dowels

1x #5 Bolt

STEP 9:

Attaching the footed base. Insert 2x wooden dowels (#4) into the outer holes on the edges

of BOTH side panels (D & E). Now insert 2x barrel nuts (#6) into the larger holes on the

inside of BOTH side panels (D & E).

Align the footed base panel (F) with the unit, ensuring the long edge with the groove in it

is facing the floor. When in place, insert 2x bolts (#5) into the large outer holes on the RH

edge of panel F.

Repeat on the LH side with 2x bolts (#5). Fully tighten. Now insert 2x thin cam locks into

the large holes on the inside of central panel (C) and turn clockwise to lock.

STEP 8:

Hardware for Step 9:

4x #4 Wooden Dowels

4x #6 Barrel Nuts

4x #5 Bolts

2x #3 Cam Locks (thin)