- ページ 4

室内装飾品 Great Little Trading Buttons Medium BookcaseのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Great Little Trading Buttons Medium Bookcase 6 ページ。

STEP 1:

Prepare back leg panels A and B by inserting 4x cam dowels (#1) into the holes as shown.

STEP 2:

Attach 2x side panels (G) to shelf panel E with 4x flat headed

screws (#2).

Repeat for the remaining E and G panels.

These are the lower two shelf components.

Note:

The large drill holes on the side panels to face inwards.

Hardware for Step 1:

#1 Cam Dowels

Hardware for Step 2:

#2 Flat Headed Screws

STEP 3:

Lay the two shelf components on the floor with the grooved edge facing upward. This is

the back. As shown position back leg panels A and B over the constructed shelves with the

grooves facing up and aligned with the shelves.

Push panels A and B into position. Insert 4 x cam locks (#3) into the large drill holes on the

inside of each G panel, turn clockwise to tighten.

TOP

Hardware for Step 3:

#3 Cam Locks

Using cam locks:

When inserting into the panel, ensure that

each cam lock's arrow is pointing towards the

drill hole on the side edge of the panel & the

dowel that it will be receiving.

When the panels are in the connected

position, using a screwdriver, turn the cam

lock in a clockwise direction to lock and

secure.

B A

BASE