- ページ 11

セキュリティシステム 2gig Technologies Go!Control PanelのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。2gig Technologies Go!Control Panel 20 ページ。

VIEWING EACH SENSOR'S STATUS

The Control Panel will also show you which sensor‐protected doors and windows are open.

Your installer has programmed descriptive names for each sensor‐protected door and

window. The Control Panel's color display will show the names of which doors and windows

are open.

•

The top of the display on the Home, Security, and Menu screens sensor status. See

"System Status Icons" on page 25.

Tapping the Status button also displays a list of open sensors and general system status

and alerts.

A The Status Bar shows the system mode and shows system status icons. See "System Status Icons"

on page 25.

B The Arm button on the security and menu screens lights green when all perimeter sensors are

closed. The Arm button lights orange if any perimeter sensor is open.

C The Home button lights green when all perimeter sensors are closed. The Home button is not lit if

any perimeter sensor is open.

D The icon displayed shows that an interior sensor is open. Other icons can appear here as well. See

"System Status Icons" on page 25.

The Control Panel reports alarm conditions on all sensors when armed both visually (on the

status bar, and through a system alert icon) and audibly (through voice and chime

announcements). There are times, though rare, that an sensor will send an alarm condition to

the Control Panel when no alarm exists. The conditions of a false alarm vary depending on the

type of sensor and how that sensor communicates with the Control Panel.

•

Perform a System, Sensor, and Panel Test to find any false alarm conditions. See "System

Test" on page 34. See "Sensor Test" on page 35. See "Panel Test" on page 35.

Burglary Protection