- ページ 2

モニター ADELSYSTEM DPY351のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。ADELSYSTEM DPY351 4 ページ。 Monitor and control panel for adelbus network

ページを印刷する

Product Description

The DPY351 is a robust and versatile multifunction display that

allows monitoring, configuring and managing the ADELSystem

devices connected in an ADELBus network. It is equipped with

a high-brightness and wide viewing-angle 3.5'' TFT screen

which guarantees an optimum visibility in any operating

condition. The user interface is clear, intuitive and allows

configuring and managing ADELBus network through its

Ethernet interface by remotely monitoring connected devices,

using the SNMP and Modbus TCP protocols. The configuration

of the Ethernet connection is very straightforward and can be

done by means of the embedded webserver or the intuitive user

interface. The device IP addressing can be static or dynamic

using the DHCP protocol. This makes the connection of a

DPY351 to a LAN very easy. It is possible to connect several

devices in chain together, up to 50.

1.1

Feature

ADELBus network manages all the connected devices.

1.2

Monitoring

It is possible the monitoring of the input and output data, peak

current, peak voltage, all the battery parameters such as

temperature, State of Charge, etc....

1.3

Configuration

With the DPY351, it is possible to modify the parameters of any

ADELsystem device connected: DC Ups, Power Supply and

Battery Charger.

1.4

Alarms management

All the alarms present on the single device are immediately

reported.

1.5

History

The history parameters are recorded inside each device. The

DPY351 allows inspecting all the historical parameters of each

single device.

1.6

Event

Actions that are coordinated among the devices connected can

be programmed, thus automating the system.

ADELBus Connections

ADELBus is the ADELSystem network to interconnect the

devices via Modbus and Canbus protocols.

ADELBus is used as power management system for all

connected equipment, such as the DC-Ups, battery charger,

power supply. Every compatible device with ADELBus is

equipped with one or two data ports. The devices are simply

chained together, forming a local data network. Monitoring

panels such as the DPY351 can be used for monitoring and

control all connected ADELBus equipment.

CAUTION: Never connect a non ADELBus device to the

ADELBus network directly! This will void warranty of all

ADELBus devices connected.

2.1

Event based commands

With ADELBus, a device can be programmed to initiate an

action at another connected device. This is done by means of

event-based commands.

2.2

How to set up an ADELBus network

Connections between the devices are made by standard

straight ADELBus cables. ADELSystem can supply these

cables. These (CAT5) cables are also commonly available at

computer supply stores. For the Can Connection in some

devices it is usual use twisted pair cable with shield.

Up to 50 ADELBus devices can be connected together.

The electric power for the network comes from the connected

devices. Otherwise, if it is not enough it is necessary to connect

the device by + and – connector AUX5.

ADELBus needs a terminating impedance on both ends of the

network, for that it is present a switch termination on the Device.

2.3 Mains Technical Data

Type

Weight

Dimension

Dimension Display

Languages

IP Degree

Power Supply

Power Consumption

2.4 Dimensions

Installation

3.1 Panel Mounting

It is possible to mount DPY351 through a 90mm hole on the

Panel and fix them by 4 2.9 x 16. No limit for the Panel thickness.

3.2

How to Supply DPY351

The DPY351 can be powered from the ADELBus network.

There must be ADELBus (AUX3) powering devices available to

provide sufficient power to the network. If there is no ADELBus

powering device or the available power is not sufficient, the

DPY351 must be connected to a 12/24/48 V battery or Output

Load via the supplied connector (AUX5).

3.3 Connection Layout (Fig.1)

DPY351

0,25 kg.

0.55 lbs.

112 x 116 x 53 mm

4,41 x 4,57 x 2,09 inches

90 mm; 3,5 inches

Front: IP65

Back: IP20

PowerBus/ 12/24/48 Vdc input

Sleep 0,06 W

Normal Mode: 3.6 W