- ページ 14

食器洗い機 Gaggenau KG 260 CAのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Gaggenau KG 260 CA 20 ページ。 Gaggenau kg 260 ca gas cooker operating & assembly instructions
Gaggenau KG 260 CA にも：取扱説明書 (14 ページ)

ページを印刷する

1. Assembly Instructions

7. Assembly instructions

7.1 Important notes

Please observe the safety notes and the

important notes (Chapter 1).

The installing technician is responsible for

perfect functioning of the appliance at its installa-

tion location.

He must explain the operating principle to the user

with reference to the operating instructions and

must show how to switch of the electricity and gas

whenever required.

Caution:

Before connecting the appliance, please check

whether the local connection conditions such as

the gas type, gas pressure and mains voltage and

the appliance settings are correct. Refer to the

adhesive label on the gas connection or the rating

plate for the necessary information. This gas hob

conforms to the categories that are specified on the

rating plate. The rating plate can be found on the

appliance and additionally on the enclosed adden-

dum sheet. By replacing nozzles, it is possible to

set the appliance to any gas listed on the rating

plate.

If the data should not agree, the appliance must

be set to the required gas type and the available

pressure.

As this gas hob is not intended for connection to an

exhaust gas system, pay attention to the applicable

installation conditions.

Note on ventilation:

To ensure good combustion, the room in which this

appliance is installed must have a minimum volume

of 20 m

and a door that opens out to outdoors or a

window that can be opened.

The appliance may be installed in kitchen

combinations made of wood or similar combustible

materials without taking additional measures. The

rear wall must consist of non-combustible material.

A minimum distance of 150 mm (6") from heat-

sensitive items of furnishing or contact surfaces

(cupboard side panel) must be observed.

The hob conforms to appliance class 3 and must be

installed in the worktop as shown in the installation

sketch.

The distance between the suspended cupboard

and the worktop must be at least 600 mm (24").

Attention must be paid to the manufacturer's

specified safety clearance when a vapour extractor

is installed.

Wall trims must be heat-resistant, and the minimum

distance between the hob and the wall trim is at

least 35 mm (1

").

After unpacking, check the appliance for any

transportation damage and report this immediately

to the transportation company.

Technical modifications reserved.