- ページ 7
室内装飾品 Great Little Trading L5288のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Great Little Trading L5288 10 ページ。 Small townhouse bookcase
ページを印刷する
TOP
STEP 7:
Now attach the 4x feet (H) to the base panel (E).
Insert 4x wooden dowels (#3) into the inner hole of each hole set at the
corners of panel E.
Apply a foot (H) to the first corner, using the wooden dowel to position
it and then secure in place using 1x crosshead bolt (#7).
Ensure the hardware is fully tightened, but do not over-tighten or use
power tools for this step or you risk driving the bolt through the base
panel.
Repeat with 3 remaining feet.
Hardware for Step 7:
4x #7 Crosshead Bolts
4x #3 Wooden Dowels
#3
H
E
#3
#3
H
H
#3
#7
BASE
H
#7
Hardware for Step 8:
4x #4 Pivoting Cam Dowels
TOP
#4
#4
#7
STEP 8:
#7
Prepare the roof panels (G & I) by inserting 2x pivoting cam dowels (#4)
into the outer small holes of BOTH panels as shown.
The holes are drilled at an angle and it is best to insert the hardware at
the same angle as the hole.
The pivoting hardware is inserted using your fingers, not a tool.
Please ensure the thread on the cam dowel is fully inserted at the higher
point of the hole.
When fully inserted, please ensure the line of pivoting is parallel with the
longer sides of the roof panels.
Please take care as the hardware can mark the unit during insertion.
However, please note that this will not show in the finished unit.
Note: Some cracking around the drill hole is normal as the bolt bites into
the wood at an angle. This will be covered once the roof is attached to the
main body of the bookcase.
7
#4
G
I
BASE
#4