- ページ 7

室内装飾品 Great Little Trading Loxley L5013のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Great Little Trading Loxley L5013 8 ページ。 Storage cupboard

STEP 7:

With the help of a second person, carefully turn the

unit over.

Position lower back panel F in the cupboard section

(nearest the feet.) Position the upper back panel E

on the top where the shelf is.

Ensure the holes on the back panels and the pilot holes in the unit are clearly

aligned.

Carefully insert 18x back panel screws (#10) into the holes and tighten with a

Phillips screwdriver. It is important these screws are inserted straight or you risk

damaging the unit.

There are 2 holes highlighted below that are left to apply the anti-tip kit that is

provided.

#10

Hardware for Step 7:

18x #10 Back panel Screws

(20mm)

STEP 8:

With the help of a second person, carefully stand

the unit on its feet.

Insert the hinge sets into each side of the unit.

The protruding rod on each hinge needs to be pushed in the drill holes on the

base panel (H) and underside of the mid shelf (D).

Pivot the hinges out in order to receive the door panels.

#11

Hardware for Step 8:

2x #11 Pairs of Hinges

Protuding rod goes into drill

hole on underside of mid shelf

#11

Protuding rod goes into drill

hole on base panel