- ページ 6
換気フード Gaggenau AI240191のPDF ユーザーマニュアルと設置手順をオンラインで閲覧またはダウンロードできます。Gaggenau AI240191 20 ページ。
ページを印刷するen Familiarising yourself with your appliance
5 Familiarising yourself with your appliance
5.1 Control panel
You can use the control panel to configure all functions of your appliance and to obtain information about the operat-
ing status.
Switching the appliance on or off
Switching on fan setting 1
Switching on fan setting 2
Switching on fan setting 3
Switching on intensive mode
6 Basic operation
6.1 Switching on the appliance
Press
.
▶
a The appliance starts at fan setting 2.
6.2 Switching off the appliance
Press
.
▶
6.3 Selecting a fan setting
Press , or .
▶
6.4 Switching on intensive mode
If particularly strong odours or vapours develop, you
can use intensive mode.
Press
.
▶
a After approx. 6 minutes, the appliance automatically
switches to fan setting 3.
6.5 Switching off intensive mode
Press , or .
▶
6.6 Switching on intermittent ventilation
With intermittent ventilation, the appliance switches the
ventilation on and off at regular intervals.
Press
.
▶
a The appliance runs for approx. six minutes per hour
at fan setting 1.
1
Depending on the appliance specifications
6
Switching on automatic mode
Switching the intermittent ventilation on or off
Hob-based ventilation control
Resetting the filter saturation indicator
Switching the lighting on or off
Setting the brightness
6.7 Switching off interval ventilation
Press .
▶
a The appliance starts at fan setting 2.
6.8 Switching on automatic mode
The optimum fan setting is set automatically using a
sensor.
Press .
▶
6.9 Switching off automatic mode
Press , or .
▶
a The ventilation is automatically ended when the
sensor detects no further change in the room air
quality.
a Automatic mode runs for a maximum of four hours.
6.10 Sensor control
In automatic mode, a sensor in the appliance detects
the intensity of the cooking and roasting fumes. De-
pending on the setting of the sensor sensitivity, the op-
timum fan setting is automatically switched on. If the
sensor control system reacts too weakly or too
strongly, the setting for the sensor sensitivity may
change.
¡ Factory setting: 3
¡ Lowest setting: 1
¡ Highest setting: 4
1
1
1