- ページ 18

換気フード Gaggenau AW 200-790のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Gaggenau AW 200-790 20 ページ。 Gaggenau extractor hood operating and assembly instructions

Fig. 21

Fig. 22

Fig. 23

– Secure the hood on the wall with the four screws b

(Fig. 21 and 22).

For exhaust air mode proceed as follows:

– Establish the pipe connection.

– Establish the electrical connection.

– Stainless steel chimney only (LK 010-012/022):

pull the protective film off the chimney's trims.

Note: avoid damaging the sensitive metal surfaces.

– Fit the top chimney duct unit into the base. Make

sure that the fastening holes on the side are at the

top.

– Put both chimney duct units onto the hood.

– Pull the top chimney duct unit up into its final

position and secure it with 2 screws on the ceiling

holder (Fig. 23).

Note: avoid scratches when pulling the elements

apart by placing the assembly template, for

example, over the edge of the bottom chimney

paneling to protect it.

– Insert the grease filters.