サンダー Dynabrade Dynorbital-Spirit 21060のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Dynabrade Dynorbital-Spirit 21060 13 ページ。 12,000 rpm air powered random orbital sander
Dynabrade Dynorbital-Spirit 21060 にも：取扱説明書 (8 ページ), 操作およびメンテナンスマニュアル (13 ページ)

ページを印刷する

Buy parts on line at https://Dynashop.co.uk/ for all things Dynabrade

Dynorbital-Spirit

Models:

3/8" Orbit

3/16" Orbit

21000 21011

21020 21031

21001 21014

21021 21034

21004 21015

21024 21035

21005 21016

21025 21036

21006 21019

21026 21039

21009 21060

21029 21061

21010 21063

21030 21064

FOR COMPLETE MODEL DESCRIPTION REFERENCE PAGE 6.

Read and understand this tool manual before operating your air tool. Follow all safety rules for the protection of operating personnel

as well as adjacent areas. Always operate, inspect and maintain this tool in accordance with the American National Safety Institute

(ANSI) Safety Code for Portable Air Tools – B186.1. For additional safety information, refer to Safety Requirements for the Use, Care

and Protection of Abrasive Wheels – ANSI B7.1, Code of Federal Regulation – CFR 29 Part 1910, European Committee for Standards

(EN) Hand Held Non-Electric Power Tools – Safety Requirements and applicable State and Local Regulations.

Read and understand tool manual before

work starts to reduce risk of injury to

operator, visitors, and tool.

Eye protection must be worn at all times,

eye protection to conform to ANSI Z87.1.

Respiratory protection to be used when exposed to

contaminants that exceed the applicable threshold

limit values required by law.

Carefully Read all instructions before operating or servicing any Dynabrade

Products offered by Dynabrade are not to be modified, converted or otherwise alerted from the original design without expressed written consent from Dynabrade, Inc.

Tool Intent: Dynorbital-Spirit™ Random Orbital Sander is used for sanding and finishing a variety of materials including wood, metal, plastic, fiberglass, solid surfaces,

composites, rubber, glass and stone.

Training: Proper care, maintenance, and storage of your tool will maximize its performance.

• Employer's Responsibility – Provide Dynorbital-Spirit™ operators with safety instructions and training for safe use of tools and accessories.

Accessory Selection:

• Abrasive/accessory RPM (speed) rating MUST be approved for AT LEAST the tool RPM rating.

• Before mounting an accessory, visually inspect for defects. Do not use defective accessories.

• Follow tool specifications before choosing size and type of accessory.

• Only use recommended fittings and air line sizes. Air supply hoses and air hose assemblies must have a minimum working pressure rating of 150 PSIG (10 bars, g) or 150

percent of the maximum pressure produced in the system, whichever is higher. (See Tool Machine Specifications Table.)

• DO NOT use – ......................................................

Warning: Always wear eye protection. Operator of tool is responsible for following: accepted eye, face, respiratory, hearing and body protection.

Caution: Hand, wrist and arm injury may result from repetitive work, motion and overexposure to vibration.

Buy parts on line at https://Dynashop.co.uk/ for all things Dynabrade

Air Tool Manual – Safety, Operation and Maintenance

SAVE THIS DOCUMENT, EDUCATE ALL PERSONNEL

3/32" Orbit

21040 21051

21041 21054

21044 21055

21045 21056

21046 21059

21049 21062

21050 21065

WARNING

SAFETY LEGEND

WARNING

SAFETY INSTRUCTIONS

Abrasive Power Tool.

Do Not Use Tool For Anything Other Than Its Intended Applications.

OPERATING INSTRUCTIONS

(continued on next page)

Parts Page Reorder No. APD03•02

™

12,000 RPM Air Powered Random Orbital Sander

WARNING

Practice safety requirements. Work alert,

have proper attire, and do not operate tools under

the influence of alcohol or drugs.

WARNING

Ear protection to be worn when exposure to sound,

exceeds the limits of applicable Federal, State or

local statues, ordinances and/or regulations.

WARNING

Air line hazard, pressurized supply lines and flexible

hoses can cause serious injury. Do not use damaged,

frayed or deteriorated air hoses and fittings.

AUTOMOTIVE

Effective January, 2003

Supersedes APD02•13

For Serial No. 3B1000B and Higher