- ページ 14

換気フード Gaggenau VL 051-107のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Gaggenau VL 051-107 15 ページ。 Automatically extendible hob ventilator
Gaggenau VL 051-107 にも：操作と組み立ての説明 (11 ページ), 修理指導 (16 ページ)

ページを印刷する

1. Electrical Connection

Fig. 9

Fig. 10

Fig. 11

Worktop height ≥ 90 cm,

variable position of the fan module

– Saw out the base plate in the built-in cabinet for

the fan module.

– Place the fan module in the base cabinet.

Refer to the operating instructions of the fan

module for details of how to install it.

– Using a flexible aluminium pipe (DN 125),

connect the pipe connection piece to the fan

module.

– Now lower the hob ventilator into the worktop.

Make sure that the engaging lugs on the

appliance lie exactly on the clamping springs.

Press the appliance firmly into the worktop.

The engaging lugs on the appliance "snap" into

the clamping springs.

– At the front, fix the hob clamping element onto

the worktop from below until the appliance is

pressed on evenly (Fig. 11). If the worktop is

less than 36 mm thick, place the hob clamping

element under it.

– Cut off protruding sealing tape.