- ページ 5

室内暖炉 Great Outdoors INSPIRATION-SVのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Great Outdoors INSPIRATION-SV 16 ページ。 Decorative gel-fired appliance

This gel-fired appliance is designed for
DECORATIVE USE ONLY and MUST NOT be
used for cooking.
Locate the Inspiration on a flat wall. DO NOT
locate the appliance where it will get excessively
wet or submerged in water.
A. Design and Installation Considerations
Before installing this unit, take time to thoroughly
read through these instructions, gather necessary
tools for installation, and determine a safe and
suitable location for installation of your new
Inspiration unit.
B. Tools and Supplies Needed
Before beginning the installation be sure that the
following tools and building supplies are available.
Gloves
Safety glasses
Phillips screwdriver or screw gun
Level or electronic leveling device
Appropriate screws for wall type
Pen or pencil
The Outdoor Greatroom Company
disclaims any responsibility for, and the
warranty will be voided by, the following
actions:
Installation and use of any damaged
components.
Modification of the unit.
Installation other than as instructed by
The Outdoor Greatroom Company.
Installation and/or use of any
component part not approved by The
Outdoor Greatroom Company.
Installation of any incomplete
components.
Any such action may cause a fire
hazard.
Please report any damaged or missing
components to your dealer.
The Outdoor Greatroom Company ∙ Inspiration Rev D 12/23/2010
-5-
CAUTION
Check building codes prior to installation.
Installation MUST comply with local,
regional, state, and national codes and
regulations.
Consult insurance carrier, local building,
fire officials, or authorities having
jurisdiction about restrictions, installation
inspection, and permits.
CAUTION
Sharp Edges
 Wear protective gloves and safety
glasses during installation.
Do NOT burn solid fuels in this gel-fired appliance.
CAUTION
Do NOT use gel fuel that has gotten water
or other liquid in it. Fuel may be difficult to
light and may self-extinguish. Keep lid on
gel fuel whenever not in use to prevent this
from occurring.
C.

Inspect the Appliance and Components

 Carefully remove the appliance and
components from the packaging.
 Inspect glass cylinder for cracks or chips.
 Report to your dealer any parts damaged
in shipment.
 Read all of the instructions before
starting the installation. Follow these
instructions carefully during the
installation to ensure maximum safety
and quality results.
Meijer.com