- ページ 6
ホブ Gaggenau CG261210AUのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Gaggenau CG261210AU 20 ページ。
ページを印刷する
Installation and connection
en
m
Warning – Risk of electric shock!
Do not clean the appliance using steam
cleaners.
What to do if you smell gas
Do not try to light the appliance.
▯
Do not touch any electrical switch; do not
▯
use any phone in your building.
Immediately call your gas supplier from a
▯
neighbour's phone. Follow the gas
supplier's instructions.
If you cannot reach your gas supplier, call
▯
the fire department.
Installation and service must be performed by
an authorised person.
6
Installation and connection
S tatutory requirements
I n s t a l l a t i o n a n d c o n n e c t i o n
This installation must conform with the following:
▯
Manufacturer's Installation instructions
▯
Local Gas Fitting Regulations
▯
Municipal Building Codes
▯
Refer to AS/NZS 5601.1 for Gas Installations
▯
S.A.A. Wiring Code
▯
Local Electrical Regulations
▯
Any other statutory regulations
Preparing to install
Refer to AS/NZS 5601.1 for piping size details. These
built-in cooktops are intended to be inserted in a
benchtop cutout.
Do not stick the cooktop onto the worktop with silicone.
Only an officially authorised technician should connect
the appliance.
Before you begin, turn off the gas and electricity supply.
Before connecting the unit, check whether the local
connection conditions (type of gas) are compatible with
the unit's setting. Observe any special conditions
imposed by local suppliers (utilities). The specifications
of this cooktop are stated on the data label located on
the bottom of the cooktop base.