- ページ 2

医療機器 Cefndy T212のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Cefndy T212 4 ページ。 Attendant propelled & self propelled shower commode chairs

Pack Contents

Assembly Instructions

Please note:

 When unpacking carefully examine the product to ensure it is complete. See

contents list above.

 Separate Assembly instructions are included in the box, but are also included

here.

 Before you begin assembly check for any damage. If damaged please contact

your supplier and refrain from using the product.

 Do not attempt to use if the product is damaged.

Assembly

 Place the Chair Base Frame (A) on a level floor. At the rear of the frame you

will see two black threaded hand wheels (F). Undo the wheels so that the

holes are clear.

 Place the two legs of the back rest (B) into the holes on the back edge of the

base frame (A).

 Secure the back rest by inserting the hand wheels and turning until you feel

the nut biting against the leg of the back. Do not overtighten – finger tight is

sufficient.

 Place all four castors into the leg tubes and secure using the pin clips. If fitting

T212/MT212 see below.

 On each side of the front legs of the commode main frame there are two

retaining lugs either side.

 Take the footrests and align the holes in the inverted "U" section with the lugs.

Lower down into place.

Ref: T210/T212/MT210/MT212/X399/X499 Nov2019

Form No: Cef 0035

User Instructions for Attendant Propelled &

Self Propelled Shower Commode Chairs

T210, T212, MT210, MT212, X399 & X499

Inside the box you should find:

1 x Chair Base Frame

1 x Back Rest

2 x Footrests

4 x Braked Castors(T210 / MT210/X399/X499)

2 x Braked Castors & 2 x 685mm Wheels (T212 / MT212)

4 x Castor Pin Clips

2 x Hand-wheels

1 x Commode Potty

2 x Wheel Axles, Axle bushes & Stabilising bars (T212 /

MT212)

2 x Brake Assemblies & Brake Brackets. (T212 / MT212)

1 x User Instructions

1 x Assembly Instructions