- ページ 8

ホブ Gaggenau VG 231 AUのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Gaggenau VG 231 AU 19 ページ。 Gas cooker
Gaggenau VG 231 AU にも：インストレーション・インストラクション (4 ページ)

3. Operation

Fig. 4

Fig. 5

The cooking positions must only be ignited

when all burner parts are fitted. Otherwise,

malfunctions may occur on the ignition unit.

Switching on (Fig. 4):

– Place a pot or a pan on the corresponding

cooking position.

– Press in the control knob fully and keep it

pressed. This activates the ignition.

– Turn the control knob to the left to the

"high" position.

If the flame should not ignite within 2 to 4 seconds,

turn the control knob further to the left to the

"low" position and then back to the

position after ignition. It is often faster to ignite in

the low position because the various gases have a

differing ignition response.

Once the flame is burning, keep the control knob

pressed for another 5-8 seconds. The thermal

sensor must be heated for 5-8 seconds before the

knob can be released.

Repeat the operation if the flame should go out

again.

The flame size can be set continuously between full

and low by slowing turning the control knob.

Switching off (Fig. 5):

Fully turn the control knob to the left to the 0

position on the left.

"high"