- ページ 4
グラインダー Dynabrade 52298のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Dynabrade 52298 4 ページ。 Hp/short shank/rear exhaust die grinder
ページを印刷するDisassembly/Assembly Instructions-.7 Hp Rear Exhaust (continued)
3. Using a 34 mm crows foot and firmly holding motor housing, turn 01461 Lock Nut counter clockwise to loosen assembly.
4. Adjust orientation of the throttle lever to agree with your grip and comfort level allowing for additional rotation due to torquing.
5. Using the 34 mm crows foot and (torque 45 N•m/400 In. lb. while firmly holding motor housing in place to reduce housing rotation) to tighten
01461 Lock Nut.
Tool Assembly Complete. Please allow 30 minutes for adhesives to cure before operating tool.
Important: Motor should now be tested for proper operation at 90 PSIG. If motor does not operate properly or operates at a higher RPM than marked on the
tool, the tool should be serviced to correct the cause before use. Before operating, place 2-3 drops of Dynabrade Air Lube (P/N 95842) directly into air inlet
with throttle lever depressed. Operate tool for 30 seconds to determine if tool is operating properly and to allow lubricating oils to properly penetrate motor
Loctite
®
is a registered trademark of Loctite Corp.
95281 – 19 mm open-end.
Visit Our Web Site: www.dynabrade.com
DYNABRADE, INC., 8989 Sheridan Drive • Clarence, NY 14031-1490 • Phone: (716) 631-0100 • Fax: 716-631-2073 • International Fax: 716-631-2524
DYNABRADE EUROPE S.àr.l.,
© DYNABRADE, INC., 2001
Optional Accessories
Collet Inserts
•
50065 – 1/8"
•
50013 – 1/4"
•
50016 – 6 mm
•
50039 – 8 mm
Dynaswivel
®
•
Swivels 360° at two locations which
allows an air hose to drop straight to
the floor, no matter how the tool is held.
•
94300 Composite 1/4" NPT
Wrenches
Zone Artisanale • L-5485 Wormeldange—Haut, Luxembourg • Telephone: 352 76 84 94 1 • Fax: 352 76 84 95 1
53032 1/4" Drill Chuck
•
Includes: 53052 Mated Chuck Key
Email: [email protected]
52296 Repair Collar
•
Specially designed collar for use in vise to
prevent damage to valve body housing
during disassembly/assembly.
96045 Motor Tune-Up Kit:
•
Includes assorted parts to help maintain
and repair motor.
95262 – 14 mm open-end.
DYNABRADE
PRINTED IN USA
®