- ページ 5

農機具 GREAT PLAINS 4000TMのPDF 調整マニュアルをオンラインで閲覧またはダウンロードできます。GREAT PLAINS 4000TM 7 ページ。

Hydraulic Down Pressure Adjustment: (1200TM,

1500TM, 1800TM, 2400TM, 3000TM)

Note: This setup procedure is for tractors with closed

center pressure compensated or pressure and flow

compensating hydraulic systems. Open center

hydraulics are NOT SUPPORTED.

1) With the machine unfolded, engage the fold/unfold

hydraulics for continuous flow (unfold position).

2) From the tractor cab, adjust the hydraulic flow so

the needle on the bypass gauge is in the green zone

1000-1500 psi (8).

Note: The faster the flow of oil

through the system the greater the potential for oil

heating, premature wear or tractor damage.

3) At the valve, adjust the valve (9) to set the initial

down pressure. This is usually set at 300-400 psi (do

not exceed 800 psi).

During field operation, if the wings are running too

high, increase the pressure setting to help level the

machine. If the center of the machine is running too

high, decrease the pressure setting.

Hydraulic Down Pressure Adjustment: (3500TM)