- ページ 6

セキュリティシステム Hi-Tech SMART GUARDのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Hi-Tech SMART GUARD 14 ページ。

Arming all areas at once can be done with Quick FULL ARM by touching

the 0 button for area number.

User code

Arming the system can be done with proximity (RFID) cards and tags.

They can be used along with the user codes or instead of them. These

cards have to be hold in front of the keypad reader in order to read them

properly. They have to be configure in the system before use.

2.2. STAY ARM mode

The STAY ARM mode differs from FULL ARM only in that it does not

monitor all zones. These zones are disable for monitoring in this mode

(bypassed). This means that the user can stay in the armed area without

generate alarms. This mode is activate the same way like FULL ARM -

after entering a valid user code or proximity card.

User code

GPS SYSTEMS BULGARIA

www.smart-hitech.eu

Quick FULL ARM for all areas

FULL ARM

STAY ARM

 +359 700 20 820, +359 887376336

4004 Plovdiv 75A D. Talev Str

All areas

Area

number

6 / 14

Exit time