- ページ 3

グラインダー Dynabrade 60051のPDF 安全、操作、メンテナンスをオンラインで閲覧またはダウンロードできます。Dynabrade 60051 8 ページ。 Wrenchless pencil grinder with turbine brake and hose swivel

ページを印刷する

Routine Preventative Maintenance:

• Air tool markings must be kept legible at all times. User is responsible for maintaining specification information i.e.: Model #, S/N, and RPM.

• Blow air supply hose out prior to initial use.

• Visually inspect air hoses and fittings for frays, visible damage and signs of deterioration. Replace damaged or worn components.

• Refer to Dynabrade's Warning/Safety Operating Instructions Tag (Reorder No. 95903) for safety information.

Handling and Storage:

• Use of tool rests, hangers and/or balancers is recommended.

• Protect tool inlet from debris.

• DO NOT carry tool by air hose.

• DO NOT force grinding swarf into the tool with compressed air; specifically avoid the front bearing areas.

• Protect abrasive accessories from exposure to water, solvents, high humidity, freezing temperature and extreme temperature changes.

• Store accessories in protective racks or compartments to prevent damage.

Filter

90 PSIG

(6.2 Bar)

• Dynabrade Air Power Tools are designed to

operate at 90 PSIG (6.2 Bar/620 kPa) maximum

air pressure at the tool inlet, when the tool is

running. Use recommended regulator to control

air pressure at each work station, if the supply

pressure is high.

• Ideally the air supply should be free from

moisture. To facilitate removing moisture

from air supply, the installation of a

refrigerated air dryer after the compressor

and the use of drain valves at each

tool station is recommended.

All Dynabrade motors use the highest quality parts and metals available and are machined to exacting tolerances. The failure of quality pneumatic motors can most often be

traced to an unclean air supply. Air pressure easily forces dirt or water contained in the air supply into motor bearings causing early failure. Dirt and water often score the inner

workings of the tool resulting in limited efficiency and power. Our warranty obligation is contingent upon proper use of our tools and cannot apply to equipment which has been

subjected to misuse such as unclean air, wet air or a lack of maintenance during the use of this tool.

All Dynabrade portable pneumatic power tools are rigorously inspected and performance tested in our factory before shipping to our customers. If a Dynabrade tool develops

a performance problem and an inherent defect is found during normal use and service, Dynabrade will warrant this tool against defects in workmanship and materials for

the lifetime of the tool. Upon examination and review at our factory, Dynabrade shall confirm that the tool qualifies for warranty status, and will repair or replace the tool at

no charge to the customer. Normally wearable parts and products are NOT covered under this warranty. Uncovered items include bearings, contact wheels, rotor blades,

regulators, valve stems, levers, shrouds, guards, O-rings, seals, gaskets and other wearable parts. Dynabrade's warranty policy is contingent upon proper use of our tools

in accordance with factory recommendations, instructions and safety practices. It shall not apply to equipment that has been subjected to misuse, negligence, accident or

tampering in any way so as to affect its normal performance. To activate lifetime warranty, customer must register each tool at www.dynabrade.com. Dynabrade will not

honor lifetime warranty on unregistered tools. A one-year warranty will be honored on all unregistered portable pneumatic power tools. Lifetime warranty applies only to

portable pneumatic tools manufactured by Dynabrade, Inc. in the USA. Lifetime warranty applies only to the original tool owner; warranty is non-transferable.

MAINTENANCE INSTRUCTIONS - CONTINUED

Non-Lubricated Air System

Regulator

Closed Loop Pipe System

(Sloped in the direction of air flow)

To Tool Station

Ball

Valve

Drain

Valve

PSIG @ Air Tool

90 PSIG MAX

Lifetime Warranty

Regulator

Filter

➤

Drain

Air Hose

Valve

(6.2 Bar)

Drain Valve

Notice

Air Flow

Refrigerated

Air Dryer

Ball

Valve

Air Flow

Air Compressor

and Receiver