- ページ 6

冷蔵庫 Gaggenau RB 292のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Gaggenau RB 292 20 ページ。
Gaggenau RB 292 にも：取扱説明書 (19 ページ)

Aligning the appliance

Place the appliance in the designated location and

align. The appliance must be level. If the floor is

uneven, use the front height-adjustable feet. Adjust

the height-adjustable feet with a socket wrench.

Note

The appliance must be upright. Please align it with

a spirit level.

After installing the appliance, wait at least 1 hour until

the appliance starts up. During transportation, the oil

contained in the compressor may run into the

refrigeration system.

Before switching on the appliance for the first time,

clean the interior. See Cleaning the appliance.

The socket must be near the appliance and also freely

accessible following installation of the appliance.

The appliance complies with the protection class I.

Connect the appliance to 220–240 V/50 Hz

alternating current via a correctly installed socket with

protective conductor. The socket must be fused with

a 10 to 16 A fuse.

For appliances operated in non-European countries,

check whether the stated voltage and current type

match the values of your mains supply match the

values of the mains supply. These specifications can

be found on the rating plate.

Warning

Never connect the appliance to electronic

energy saver plugs.

Our appliances can be used with mains and sine-

controlled inverters. Mains-controlled inverters

are used for photovoltaic systems which are

connected directly to the power supply system.

Sine-controlled inverters must be used for

isolated applications (e.g. on ships or in

mountain lodges) which are not connected

directly to the national grid.