- ページ 3

アクセサリー 75F Pressure ControllerのPDF 取付・取扱説明書をオンラインで閲覧またはダウンロードできます。75F Pressure Controller 7 ページ。 Pressure sensor package

Mount the Smart Node

the controller so that the antenna points straight up. The controller

may be mounted on the chassis of the unit or on the plenum.

Mounting the Pressure transmitter.

calibrated and should be installed vertically with the brass fittings

pointing downward and the arrow on the label pointing upward. If

the unit must be installed flat there may be a zero shift. The shift can

be corrected with the zero-adjustment located inside the enclosure.

To adjust the zero, both pressure ports must be open to the

atmosphere. If the span needs to be adjusted, please contact ACI.

Mount the Interior Pickup Port

Mount the Exterior Pickup Port

impede any door opening and in no direct vacuum like the OA intake

or near any exhaust port.

WIRING

Fig.3

use two #8-1.5" Sheet metal screws. Mount

Pickup

Port

Interior

24VAC

The transmitter is factory

through a ceiling tile.

to the side of the RTU where it will not

www.75f.io

Pickup

Port

Exterior

888.590.8995 x2