- ページ 11

水システム DAYLIFF ULTRASUN UFD320DLのPDF インストレーション＆オペレーティングマニュアルをオンラインで閲覧またはダウンロードできます。DAYLIFF ULTRASUN UFD320DL 17 ページ。 Flatplate solar systems

Periodically, recommended every three months a general inspection should be made

and the following items checked:-

Collector condition, leaking unions, dirty or broken glass, damaged water seals.

Tank condition including casing damage, piping leaks and valve operation.

Electric heater power connections.

Replace worn out magnesium anode periodically.

Booster pump and pressure tank settings (if applicable).

Check shading of collectors

Once a year, it is recommended to flush the collectors to remove any settled

sediments that may affect the thermosyphon flow.

9. TROUBLE SHOOTING

DIRECT SYSTEMS

PROBLEM

Insufficient

hot water

POSSIBLE CAUSE

High hot water usage at night

Prevailing weather conditions

Non-operation of electric booster

Air locks in the collectors

Slow leaks by system or pipe work

Blockage in the connection pipes

Collectors blocked with sediments

SOLUTION

Rotation use or replace with a larger

system

Incorporate complimentary electric

heater to be used when irradiation

is low

Replace the electric heater

Ensure tank connections are higher

than collectors connection

Pressure test the pipes

Visually inspect for leaks. Raise top

right hand corner on the system

Unblock then pipes

Replace the blocked pipes

Flush collectors with clean water to

clear the sediments

Incorporate a filter in the pipework