- ページ 8

エアーコンプレッサー Aircraft 2001235のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Aircraft 2001235 18 ページ。 Mobile compressor

ページを印刷する

Technical data

3.2 Residual risks

Even if all safety regulations are observed there will remain

a residual risk in the operation of the compressor, descri-

bed in the following. All persons working with the com-

pressor must know these residual risks and follow the in-

structions which prevent any accidents or damages

caused by these residual risks. During set-up and adjust-

ment works it may become necessary to remove safety de-

vices installed by the customer. This causes different resi-

dual risks and hazard potentials each operator must be

aware of.

Technical data

AIRBOY 186 OF E

Maximum volume

180 l/min

flow

Max. pressure

8 bar

Tank capacity

6 Liters

Cylinders/levels

1 /1

Number of revolu-

3400 rpm

tions

Engine power

1,1 kW / 230 V

Type of Protection

IP 20

Duty cycle

S3-25

Weight

9,2 kg

Dimension(Lx-

315x355x370

BxH) [mm]

Sound power level

97 dB(A)

A *

*Sound power level according to DIN EN ISO 3744 (RL 2000/14/EG)

4.1 Type plate

The type plate (Abb.2) shows the following information:

Fig. 2: Type plate

Designation of model

Power of engine

connection data

Years of construction

Item number

Serial number

5.1 Delivery and Transport

Delivery

Check the compressor for any visible transportation

damages after delivery. If the compressor shows any

damages, immediately inform the carrier or the distribu-

tor.

Check whether the compressor is complete and

whether all parts included in the scope of delivery are

present.

AIRBOY 206 OF E

Transport

180 l/min

The compressor may only be transported with the en-

gine switched off and disconnected from the mains. The

container must not be under pressure during transport.

8 bar

6 Liters

5.2 Packaging

1 /1

Keep the packaging for a possible move, but at least

3400 rpm

during the warranty period.

All used packaging materials and packaging aids the

1,1 kW / 230 V

compressor are recyclable and generally need to be

IP 20

transported to the material recycling.

S3-25

Crush the packaging material made of cardboard and

supply it to the waste paper collection.

9,0 kg

The films are made of polyethylene (PE) and the uphol-

385x170x465

stery parts are made of polystyrene (PS). These materi-

als have to be delivered to a recycling station of the re-

97 dB(A)

sponsible dumping company.

5.3 Storage

The Compressor must be stored thoroughly cleaned in a

dry, clean and frost-free environment.

Do not store or transport the compressor outside or in a

moist environment.

Transport, packaging, storage

AIRBOY | Version 1.07