- ページ 9

スクーター Daymak Beast 2.0 DのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Daymak Beast 2.0 D 20 ページ。

Beast Operation (cont'd)

You will nd above the ignition a display that will show you your metrics and performance for your Beast.

Display

1) Speed - This display shows you how fast you

are going in km/h

2) Motor Power - This meter shows how much

power is being drawn from the motor. The

more power being drawn the faster the your

battery will drain.

3) Odometer - This shows how many kilome-

ters you have travelled on this unit.

4) Battery Meter - This shows how much

power you have left before you need to charge.

Once you start getting below 50% its advisory

to get to a charging station.

*PLEASE NOTE* The battery meter will dip

down when it starts and then go back up to

a steady power level. This is normal.

Beast D - Motor Switch

If you have the Beast D, on the left handlebar

you will also nd a green switch like the one

to the right. This changes it from dual or single

motor.

Put this switch up to engage just the rear

motor or down to engage both front and

rear motors.

*PLEASE NOTE* The battery will draw expo-

nentially faster with both motors running

and all range estimates are for single motor

use only.