- ページ 18
自動操縦システム Aircraft Automation ECOTRIMのPDF パイロット・マニュアルをオンラインで閲覧またはダウンロードできます。Aircraft Automation ECOTRIM 18 ページ。 Trim system
ページを印刷するAircraft Automation
5.2 PITCH SERVO DIRECTION
Select the correct pitch servo direction:
Rotate the knob to trim the airplane UP. Note the direction:
The Trim Tab should be moving DOWN (moving up in a CANARD airplane)
-
If the above is inverted, then flick dip switch number 2 as shown in the figure.
Direction can also be inverted by installing a PWM servo signal reverser cable in series
with the servo extension.
5.3 YAW SERVO DIRECTION
Rotate the knob to trim the airplane to the right, Check the following
YAW Trim should be moving LEFT
-
Direction can also be inverted by installing a PWM servo signal reverser cable in series
with the servo extension.
18 |
P a g e
ECOTRIM Trim System