- ページ 7
アンプ DYNACO SCA-80のPDF マニュアルをオンラインで閲覧またはダウンロードできます。DYNACO SCA-80 12 ページ。 C9 replacement
DYNACO SCA-80 にも： 組立マニュアル (15 ページ)
ページを印刷する
Installing the New C9 into the Amplifier
1. Install the clamp, capacitor, harness assembly into the amplifier. Use the keps
nuts with the built in lockwashers (the 3 old nuts and lockwashers aren't used).
2. Orient the new assembly as shown in Figure 5.
Figure 5-Note the orientation of the capacitor assembly when installed into the amplifier
3. Reconnect the three positive wires as shown in Figure 6:
a. Wire 1 - the red wire from PC-19 terminal 2 to the positive harness
terminal where the two red-wires come together.
b. Wire 2 – the red wire from the right amplifier channel to one end of the
positive harness
Figure 6-Reconnecting the wires to the new C9
Page 7 of 12