- ページ 5

電動工具 CEL POWERminidriverのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。CEL POWERminidriver 16 ページ。 Lithium ion screwdriver

1. Charging

Important Safety Notes

1.0

• Keep all screws, bolts and covers tightly in place. Check their condition periodically.

• Do not use power tools if the plastic housing or handle is cracked. Cracks in the tool's housing or handle can lead to electric shock.

Such tools should not be used until repaired.

• Blades and accessories must be securely mounted to the tool.

• NEVER use a tool which is defective or operating abnormally. If the tool appears to be operating unusually, making strange noises, or

otherwise appears defective, stop using it immediately and arrange for repairs by a CEL authorized service centre.

• Carefully handle power tools. Should a power tool be dropped or struck against hard materials inadvertently, it may be deformed,

cracked, or damaged.

• Do not wipe plastic parts with solvent. Wipe plastic parts with a soft cloth lightly dampened with soapy water and dry thoroughly.

• ALWAYS wear eye protection that meets the requirement of the latest revision of ANSI Standard.

IMPORTANT SAFETY INSTRUCTIONS FOR BATTERY CHARGER AND POWERmini driver

1. This manual contains important safety and operating instructions for supplied battery charger.

2. Before using battery charger, read all instructions and cautionary markings on (1) battery charger and (2) product using battery.

3. To reduce risk of injury, charge only the POWERmini driver. Other types of batteries or products may burst causing personal injury

and damage.

4. Do not expose battery charger to moisture.

5. Use of an attachment not recommended or sold by the battery charger manufacturer may result in a risk of fire, electric shock, or

injury to persons.

6. To reduce risk of damage to electric plug and cord, do not pull by cord when disconnecting battery charger.

7. Make sure cord is located so that it will not be stepped on, tripped over, or otherwise subjected to damage or stress.

8. Only plug in to a safe power outlet in a safe location.

9. Do not operate battery charger with damaged cord or plug - replace them immediately.

10. Do not operate battery charger if it has received a sharp blow, been dropped, or otherwise damaged in any way; take it to a

qualified service centre.

11. Do not disassemble battery charger; take it to a qualified service centre when service or repair is required. Incorrect reassembly

may result in a risk of electric shock or fire.

12. To reduce risk of electric shock, unplug charger from receptacle before attempting any maintenance or cleaning. Removing the

battery will not reduce this risk.

You must charge the battery before you can use the cordless driver. Before using the battery charger, be sure to read all instructions

and cautionary statements on it, the POWERmini driver and in this manual.

REMEMBER: USE THE CHARGER ONLY ON THE POWERmini driver. OTHER TYPES OF BATTERIES MAY BURST AND

CAUSE INJURY!

WARNING: Improper use of the battery or battery charger can lead to serious injury.

To avoid these injuries:

1. NEVER disassemble the battery.

2. NEVER incinerate the battery, even if it is damaged or is completely worn out. The battery can explode in a fire.

3. NEVER short-circuit the battery.

4. NEVER insert any objects into the battery charger's air vents. Electric shock or damage to the battery charger may result.

5. NEVER charge outdoors. Keep the battery away from direct sunlight and use only where there is low humidity and good ventilation.

6. NEVER charge when the temperature is below 50°F (10°e) or above 104°F (40°e).

7. NEVER connect two battery chargers together.

8. NEVER insert foreign objects into the hole for the battery or the battery charger.

9. NEVER use a booster transformer when charging.

10. NEVER use an engine generator or DC power to charge.

11. NEVER store the battery or battery charger in places where the temperature may reach or exceed 104°F (40°C).

12. ALWAYS operate charger on standard household electrical power. Using the charger on any other voltage may overheat and

damage the charger.

KEEP THESE INSTRUCTIONS AND MAKE THEM AVAILABLE TO OTHER USERS AND OWNERS OF THIS TOOL!