- ページ 5

パーソナルケア製品 7LS MD7-1000のPDF 取扱説明書および保証情報をオンラインで閲覧またはダウンロードできます。7LS MD7-1000 20 ページ。 Microdermabrasion+ cooling surface

ページを印刷する

• DO NOT hold the cooling surface on the same area of skin for more than 10 seconds. The

product is designed to be moved continuously across the surface of your skin.

• Press and hold the cooling

button for 1 second to turn the cooling surface off.

NOTE: The cooling surface is equipped with a 2.5-minute auto-off feature.

NOTE: The cooling surface operates independently. It is normal for the unit to feel warm

when using the cooling surface.

• Discard used black wool filter and replace with a new one.

• Wash your face with cold water to remove any remaining dead skin cells, then apply

your preferred moisturizer.

NOTE: Avoid using AHA (acid based) moisturizers on the day of treatment.

• Depending on your skin type, you may experience some reddening or increased

sensitivity after treatment. This is perfectly normal and usually subsides within a few hours.

• Avoid direct sun exposure after treatment. Consider applying a stronger sunscreen

as needed.

O T H E R B O D Y A R E A S

• Other areas of the body can also be treated 2-3 times a week. For example, neck,

chest, hands, etc.

• When treating larger areas, replace the black wool filter part way through the

treatment in order to maintain the level of suction.

• Make sure to cover the same area no more than 2-3 times in one treatment.

C H A N G I N G T H E F I L T E R

F I L T E R R E P L A C E M E N T I N S T R U C T I O N S

1. Remove the diamond tip from the unit by pulling straight up and set aside.

2. Remove the filter from the tip of the unit by pulling gently on the edge

of the filter and discard.

3. Place a new filter into the slot in the tip of the nozzle.

4. Reinstall the diamond tip by pressing down firmly

until secure.

To purchase additional replacement filters,

go to the retailer (where you purchased

your microdermabrasion device), or visit

(US) www.7LSbeauty.com,

(CAN) www.7LSbeauty.ca.

C L E A N I N G A N D C A R E

CAUTION: Before cleaning the unit, turn power off and remove from the charging base.

T O C L E A N T H E D I A M O N D T I P

Remove the diamond tip from the unit by pulling straight up and off

of main handle. Set the handle portion aside.

Brush clean with the included soft-bristle brush and rinse.

NOTE: For deep cleaning of the diamond tip, it is recommended to

periodically place in an ultrasonic cleaner (i.e., a jewelry cleaner) to

remove excess skin cell buildup.

NEVER submerge the handle in water or any liquid.

Reinstall the diamond tip by pressing down firmly until secure.

T O C L E A N T H E S U R F A C E

Clean the surface of the unit with a clean, damp, soft cloth.

NOTE: Never use liquids or abrasive cleaners to clean the housing of

the unit.

T O S T O R E

Place attachments into their proper compartments inside the

storage box. Store box in a dry place. Keep out of reach of children.