ページを印刷する
Installation
Before drilling, ensure that there are no hidden cables or pipes in the wall.
It is recommended that this product is installed by two people.
1. Position the cabinet in a suitable location. Carefully mark the top of the cabinet
when in the desired position using a soft pencil, ensuring it is level.
2. Remove the cabinet from the wall and place on to a soft surface, taking care not
to damage the mirror edges.
3. Measure the distance from the top of the cabinet to the mounting groove
located on the back of the cabinet. Using a spirit level, mark a horizontal line
below the pencil mark for the top of the cabinet. Place the bracket on the second
line and carefully mark the position of the holes using a soft pencil, see Fig.1
4. Before drilling, ensure there are no hidden cables or pipes behind the
mounting point. Using a suitable drill bit, drill holes in the marked positions to a
suitable depth.
5. Insert wall plugs level with the surface of the wall. If fitting to a tiled surface,
wall plugs should be inserted below the tile surface to avoid cracking. NB. For
plasterboard walls, specialist fixings should be purchased from any DIY or
hardware store.
6. Fix the brackets to the wall using the screws provided.
7. Temporarily hang the cabinet on the brackets, see Fig. 2, to mark the position
of the internal fixing hole, then remove the cabinet. Using a suitable drill bit, drill a
hole and insert a wall plug as per stage 5.
8. Rehang the cabinet in position and secure the base of the cabinet with the
supplied screw(s) and screw cap(s).
9. To install the glass shelving, place the shelf fixings provided at the required
level on each internal side of the cabinet.
10. Position the glass shelf in the fixings and secure in place by tightening the
screw on the underside of the shelf fixing, see Fig.3. Do this for all fixings to
secure the glass shelf in position.
hib.co.uk
5