- ページ 3

ドリル GREAT PLAINS BD7600-26のPDF フィールド調整マニュアルをオンラインで閲覧またはダウンロードできます。GREAT PLAINS BD7600-26 12 ページ。 Box drill

Wing Box Alignment:

1) Place blocks ahead of the wing gauge wheels.

2) Pull forward against the blocks to rock the wing

frames back.

3) Pull forward until the stop bolts (1) are firmly

against the folding arms.

4) Run a string line across the back of the drill toward

the outer ends of the wings. Make sure the string is

parallel to the center box and both measurements (2)

are equal.

5) For proper alignment, the outside ends (3) of the

wing boxes should be about 1 to 1-1/4 inch ahead of

the inside ends (4).

6) To adjust the box alignment, shorten or lengthen

the stop bolts to change the contact point with the

tool bars. Loosen the jam nut and adjust the stop

bolts in or out until the outside ends of the boxes are

1 to 1-1/4 inch ahead of the inside ends.

7) Tighten the jam nut.

*BD7600(HD)-30 & BD7600(HD)-40*

49629

*BD7600(HD)-26*

3 of 12

Document

#DRUS400C-0012A